Zur Startseite gehen
B2B
0,00 €*

Men’s Snawve BIO-Foam 4/3 Wetsuit

359,00 €*

Inhalt: 1

Preise inkl. MwSt. zzgl. Versandkosten

Sofort verfügbar, Lieferzeit: 2-5 Tage

snawve sizes
Sicher bezahlen mit PayPal Apple Pay Card

Über das Produkt

Unser Snawve BIO-Foam 4/3 ist ein großartiger Ganzjahresanzug, der dich an den kälteren Tagen warm hält, aber auch sehr dehnbar ist, so dass du an den wärmeren Tagen nicht das Bedürfnis hast, an Stärke nachzulassen. Sie wurde für 10-15° C Wassertemperaturen entwickelt, ist geklebt, blind genäht und hat durchgängig versiegelte Nähte, während das Futter aus plüschigem, recyceltem Polyester für Komfort sorgt. Der Neoprenanzug ist mit einem Frontreißverschluss ausgestattet und liegt eng an, um ein Auslaufen zu verhindern. Die Vorderseite des Neoprenanzugs ist von der Brust bis zu den Knien einteilig gestaltet, um eine größere Abdeckung des dickeren Schaums in einem nahtlosen Design zu gewährleisten und die Wärme zu erhöhen. 

  •  Hergestellt in Europa. 
  •  30 TAGE GARANTIE: Du hast 30 Tage ab Erhalt deines Produkts Zeit für die Rückgabe. 
  •  1 JAHR GARANTIE: Snawve bietet eine 1-Jahres-Garantie auf Herstellungsfehler. 
Über die Marke/a> Nachhaltigkeit You Tube Technical details Versandinformationen Fragen

Über die Marke

Führe den Wandel zur Nachhaltigkeit in der Neoprenanzugbranche an 

Es ist Zeit für eine Veränderung. Wenn die Neoprenanzugindustrie in den letzten Jahren etwas gelernt hat, dann, dass es ein Alptraum für umweltbewusste Verbraucher ist. Greenwashing, ausgefallenes Marketing und in einigen Fällen regelrechte Lügen sind das, was potenzielle Käufer erwartet, und letztendlich wird der Schaumstoff immer noch auf Erdöl oder abgebautem Kalkstein basieren. Nicht so bei Snawve - einer ihrer Grundwerte ist Transparenz - darüber, was in ihren Neoprenanzügen enthalten ist und warum, neben No Neopren Always! Sie glauben, dass sie die erste Marke sein könnten, die mit No Neopren beginnt. Snawve ist vom ersten Tag an neoprenfrei.

Sustainability

Why is this product a MARKET-LEADING ECO-SOLUTION for protecting the environment?

All Snawve wetsuits are made from a mix of 4 natural resources, removing the petrol or mined limestone one would traditionally find in wetsuit foam: 

  • Natural rubber (100% FSC Certified) 
  • Oyster Shell (Recycled from food production waste) 
  • Sugar Cane 
  • Rapeseed Oil They line their foam with recycled polyester from post-consumer plastic bottles. 

Their values

NO NEOPRENE! ALWAYS 
They exclusively use environmentally focused materials, avoiding petrol or limestone neoprene, and opting for natural, regenerative foam alternatives. 

SUSTAINABILITY AT EVERY TURN
Be it materials, packaging, or shipping, they consistently ask: "What is the most sustainable way to approach this?" 

TRANSPARENCY
They will always be upfront about what is in their wetsuit and why. They won't pull the wool over anyone's eyes... Or in most cases, equally harmful limestone foam. 

SUSTAINABLE VALUE
They understand right now sustainable can mean more expensive. Their goal is to make owning a sustainable wetsuit a possibility for everyone, passing any cost savings as they grow on to their customers. 

SNAWVE x CIRCULAR FLOW WETSUIT RECYCLE PROGRAMME

They are delighted to partner with Circular Flow to ensure old wetsuits do not end up in landfills and are turned into second life products through the Circular Flow recycle center.

YouTube

Aktuelle Videos mit Tipps zum Shapen und Produktinformationen. Für weitere Videos besucht unseren Kanal. @ecosurfsupply

Technical details




Surfboard Shaping Workshop

  • Learn how to build a surfboard from start to finish
  • Customise your surfboard as you wish
  • Experience new eco-friendly surfboard materials
  • Go home with a complete surfboard
  • All shapes, all sizes, all board types available

In our 1-week shaping workshop we promise to build your dream surfboard with our shaper Adrian Kuschke. Whether its a Surf, Foil or SUP we guarantee an excellent finish using the finest eco friendly materials the surfboard industry has to offer.

Learn more

Discover Our Agave Surfboards

Zero Salt from Cabianca
Zero Salt from Cabianca
Taking everything we’ve learned about the characteristics of static waves, The Zero Salt has been designed from the ground up for high performance surfing in rivers and wave pools. Extremely agile, responsive and built with a unique bottom shape, rocker and fin setup, this board makes zero compromises when it comes to fresh water ripping. Due to the high wear and tear when surfing rivers, Cabianca recommends ordering the board with reinforced fin plugs, carbon rails, and a solid tail patch.WAVE TYPE / SIZEStatic Waves. SKILL LEVELPerfect for starting in rivers / pools with static waves and improving your first turns. FIN SET UPThruster (ev. small back fin) TAIL OPTIONSSquash, swallow and round ROCKERSharp curve at the nose that becomes smooth on the rest of the board. CONCAVESmooth concave in the centre of the board, with a double “Vee” transition at the tail. RAIL TYPERounder edges, transitioning to sharper edges in the last third of the board.

1.094,00 €*
Evil Twin from Cabianca
Evil Twin from Cabianca
When it comes to milking every drop of speed and fun from weak summer swells, you really can’t beat a twin fin’s ability to generate speed with minimal drag. Which is why Cabianca decided it was time to give the Uber Twin model a “twin” of its own… introducing the Evil Twin. Like its Uber brother, the Evil Twin comes with the option of using a central stabiliser fin, and has enough performance DNA to rip in decent waves. But with its flatter rocker and extra width at the nose and tail, this board really excels in the kind of summer slop that makes other shortboards chop and hop back to the beach in disgust.Another small wave good option. The combination of pronounced concaves and double concave generates extra speed and helps connect sections even in the most average conditions.WAVE TYPE / SIZEIdeal model for small and medium wave conditions. Easy to maneuver when the waves aren’t powerful.SKILL LEVELTwin fin with good performance. Perfect for beginners, but also suited to all surfers with a good skill level.FIN SET UPTwin fin 2+1TAIL OPTIONSSwallowROCKERLittle rocker, both at the water intake and at the tailCONCAVEFull concave bottom, with a double concave in the tail areaRAIL TYPEFuller edges, with a flatter deck (that incorporates a little dome deck)

1.094,00 €*
Uber Twin from Cabianca
Uber Twin from Cabianca
Back in the 1970’s, Mark Richards revolutionized small wave surfboards with his twin-fin design, while in the past few years Uber have revolutionized transportation with their taxi app. Not that Cabianca is saying the new Uber Twin shape is revolutionary – it’s just an insanely fun summer board that combines all the speed and looseness of a classic twin with the maneuverability of a modern performance shortboard. Run it with a twin fin setup for ultimate retro fun, or add the rear stabilizer fin for extra drive and control. If you’re looking for a small wave board that flies down the line and turns on a dime, get the Uber Twin. Ideal for having fun, the twin fin offers good performance and stability. Always choose two inches (or less) than your normal board’s length. With good volume and width, the combination guarantees fun.WAVE TYPE / SIZEIdeal model for small and medium wave conditions. Easy to maneuver when the waves aren’t powerful.SKILL LEVELOf our twin fin designs, this is the high-performance option, providing a lot of control even at high speeds. Easy to manoeuvre but with plenty of stability. Perfect for beginners, but also suited to all surfers with a good skill level.FIN SET UPTwin fin 2+1TAIL OPTIONSSquash, Swallow, RoundROCKERLittle rocker, both at the water intake and at the tailCONCAVEPronounced concave in the middle of the board, with the transition to “Vee” bottom at the tail, and double “Vee”RAIL TYPEFuller edges, with a more modern shape, that provides good drive in more extreme conditions

1.094,00 €*
The Medina from Cabianca
The Medina from Cabianca
The perfect board for less-than-perfect waves. Being the world’s best contest surfer isn’t all about destroying the world’s best waves: it’s often more about winning decisive heats in marginal conditions. And that’s where The Medina comes in – a high performance shape that’s designed to make the most of low-performance waves. Low rocker from nose to tail makes The Medina a fast paddler, helping you to get more waves, and make more sections. Meanwhile the concave to V bottom, and a flatter dome deck makes this board stable, yet very lively and responsive. Get this board 2 inches shorter than your usual shortboard. Whatever your level, the Medina will turn your bad days into fun days… and good days into classic days.WAVE TYPE / SIZESmall to medium and waves with little powerSKILL LEVELThe Medina is a forgiving board. In the bigger dimensions it can work for a beginner, and in bad conditions works well for more contest or high-performance surfers.FIN SET UPThrusterTAIL OPTIONSSquash, Swallow, RoundROCKERLow rocker nose to tail.CONCAVETransitions from single concave at the front foot to Vee in the tail. The idea is to have greater contact with the water, at low speed. Therefore, even if the wave does not push, the board remains above the water. An easy-to-maneuver board, with rounder edges, which allows quick movements without losing stability.RAIL TYPERound rail, flat deck

1.094,00 €*
DFK 2.0 from Cabianca
DFK 2.0 from Cabianca
From ‘Da Freak Kid’ to three-time world champion, Cabianca has loved watching Gabriel’s ascent, from high-flying teen prodigy to the all-round surfing virtuoso he is today. Just like his surfing, Gabriel’s go-to pro model surfboard has evolved constantly over the past years, and after years of constant development, Cabianca thinks it’s the most refined, balanced and straight-up magic board in the lineup. Tuned to excel in quality waves, the DFK 2.0 is equally at home smashing the lip or flying far above it, and tube hunters will love its speed, balance and drive down the line.WAVE TYPE / SIZEThe DFK 2.0 works in all kinds of conditions and for most ability of surfers. If the wave has a pocket, steep face and power, the board almost rides itself! If the waves have less power, the board needs an advanced surfer to make use of its best characteristics. It is made for technical surfing from 1 to 10 feet waves – just choose the right measurements based on the waves you surf the most. SKILL LEVELIt’s Cabiancas most technical board.FIN SET UPThrusterTAIL OPTIONSSquash, Swallow, Round, Round PinROCKERThe board has a lot of rocker, mostly concentrated in the centre of the surfer’s base when standing.CONCAVEThe single concave all along the board, captures the water capture generating greater water flow pressure towards the fins. This means the more pressure the surfer applies to the board, the greater the speed.RAIL TYPEMedium to low rails with really sharp edges from before the fins to the tail. These edges allow for a better grip on the wave face, giving more drive in extreme conditions.

1.094,00 €*
Slimmer from Cabianca
Slimmer from Cabianca
Cabianca took the classic, sophisticated shape of the Trimmer and added a little performance edge to it. A pinch more rocker, less area in the nose, and a slimmer tail to increase both velocity and maneuverability. If you like combining big moves with a smooth flow, the Slimmer is the longboard for you. WAVE TYPE / SIZEPerformance longbord SKILL LEVELLongboard ideal for good surf and bigger waves and suitable for all levels of surfers. FIN SET UPFin box with stabilizer TAIL OPTIONSSquash and round ROCKERLongboard with more bottom curve CONCAVEConcave in the nose, with a transition to “V” bottom and water exiting through the tail in double “V”. RAIL TYPEEdges more similar to shortboards, with more drive and sharp edges.

1.561,00 €*
Sherpa from Cabianca
Sherpa from Cabianca
Mid length models are very much back in vogue right now, with good reason. Inspired by the hull-bottomed models of the pre-Thruster era, these boards are the perfect choice for smooth, flowing turns and effortless glide on long, cruisy waves, especially point breaks. For the Sherpa, Johnny has taken the classic vee bottom and combined it with a double concave through the tail. The vee provides smooth rail to rail surfing down the line, while the double concave creates extra lift and speed generation when you need it. The rails are thin and low: experienced surfers will love their precision and response. Choose the big twin fin setup for extra speed or the single fin for ultimate flow. WAVE TYPE / SIZEHybrid model that guarantees fun in any type of condition of waves up to 1.5 metresSKILL LEVELPerfect for beginners, but with enough performance capacity to handle a good surfing levelFIN SET UPTwin fin with big fins; box to add a single fin or a stabilizer, making it a 2+1.TAIL OPTIONSRoundROCKERClassic bottom curves, all in “V”CONCAVEClassic bottom curves, all with built in “Vee”.RAIL TYPEFrom the middle of the board to the nose, edges ratio is 60%/40%. From the middle to the tail, lower edges, resulting more drive in good waves.

1.094,00 €*
Omelette from Cabianca
Omelette from Cabianca
Perfect for beginners and surf schools, the Omelette is also ideal for intermediates looking for a cruisy board that works in a wide variety of conditions. What makes the Omelette better than your average Egg is its tip-to-tail vee bottom contour: this allows the fuller, high volume shape to remain responsive from rail to rail, while slicing through chop on windblown faces.WAVE TYPE / SIZEClassic funboard, or mid-length, for all type of wavesSKILL LEVELPerfect for beginners, but with enough performance capacity to handle a good surfing levelFIN SET UPThree finsTAIL OPTIONSSquashROCKERSimple bottom curve, all in “V”CONCAVEDouble “V” water outletRAIL TYPEFuller edges, with a flatter, slightly domed deck

1.407,00 €*
XXX from Cabianca
XXX from Cabianca
For this design Johnny took the basic shape of The Medina and introduced elements that make stubby summer boards such wave catching machines – extra width, a fuller foil, a rocker and plenty of foam under the chest. Finally, he added a triple wing, making this board perfect for high velocity snaps and n releases.A good nose and tail area, with the wings on the back of the keels, make this model an excellent option for small wave days. Fast and stable. WAVE TYPE / SIZEIdeal for small waves up to 1mSKILL LEVELPerfect for beginners, but also suited to all surfers with a good skill level.FIN SET UPTri-finTAIL OPTIONSSquash, Swallow, RoundROCKERLittle rocker, both at the water intake and at the tailCONCAVEPronounced concave in the middle of the board, with transition to “Vee” bottom at the tail, with double “Vee”RAIL TYPEFuller edges, with a flatter deck (little dome deck)

1.094,00 €*
70s Twin from Cabianca
70s Twin from Cabianca
Just like the spirit of the seventies, the twin fin never really died – it lives on in the muscle memory of old surfers and shapers, and in the upgraded designs of guys like Johnny, who learned from the masters. Johnny’s version has plenty of the cruisy retro feel of a classic twin, but with all the extra sensitivity and response you expect from a modern master of performance shapes.Inspired by the Californian movement from the 1960s and ’70s, and the transition from longboards to shortboards. It gave rise to this small model, with 2 fins, that led to more aggressive and modern maneuvers.WAVE TYPE / SIZEClassic from the 60s and 70s designed for small wavesSKILL LEVELVintage Twin fin. For any level of surfing. Ideal for a beginner who wants to take their first turns.FIN SET UPTwin finTAIL OPTIONSBig swallowROCKERLittle rockerCONCAVEFull “Vee” bottomRAIL TYPEDue to the flatter deck (almost no dome deck), the rails are fuller, with a 60s and 70s influence.

1.094,00 €*

Informationen zum Versand

100% sichere Bezahlung PayPal / Klarna / Kreditkarte
Versand in alle EU-Länder innerhalb von 1-2 Wochen
Lieferung in 3-5 Werktagen nach Deutschland

Fragen?

Besucht uns in unserem Büro

Josefstraße 23, Halle 50 a, 82178 Puchheim, Germany
Schreibt uns eine Mail

info@ecosurfsupply.com
Schickt uns eine Nachricht via WhatsApp/Telefon
+49 (0) 1732054799

Become a partner!
Let's work together to make surfing and the industry more sustainable!

What we are looking for:

  • I do produce sustainable products for the surf industry and want to be a partner and/or
  • I am looking for an europe wide distributor for my products and/or
  • I am missing a product that I would like to suggest to you and/or
  • I have a new innovative sustainable idea and need resources (equipment, knowledge, etc) in order to realise it.


Please send us all your details to adrian@ecosurfsupply.com with a catalog of your products and why you think you would be a good fit for us. If you have it, also your distribution conditions.

Whether you're a professional shaper, a hobby shaper or a passionate surfer, we've got you covered.

Subscribe to our newsletter! Don't miss out on:
•⁠ ⁠News about upcoming delivery tours
•⁠ ⁠Discounts and promotions that will make you smile
•⁠ ⁠Shaping tips and tutorials
•⁠ ⁠Updates and information on new and interesting products
•⁠ ⁠Content about sustainability in surfing
•⁠ ⁠Behind-the-scenes insights from Eco Surf Supply, that we want to share with you :)
•⁠ ⁠Updates on upcoming events

For just €50 per half day (6 hours) we offer you our fully equipped shaping bay in Munich. It includes a shaping room, a sanding room and a laminating room, all equipped with the necessary machines. Consumables are charged separately, but we have all the important shaping materials in stock to save you unnecessary delivery times and to provide you with high quality and sustainable materials.

Send us your request to info@ecosurfsupply.com or by using or contact form and discuss the details with our head shaper Adi. For beginners we also offer Shaping Workshops. These are run by our experienced shapers and will give you the knowledge you need to shape your own board. Check out our workshops page for more information. 

Check out our Workshops

Our headquarter is in Munich, Germany. But we sell online all over Europe. To avoid long shipping distances and to offer you the best possible delivery conditions, we have blanks in stock for you in France, Spain, Portugal and the UK.

In addition, we are regularly on delivery tours to get in touch with you and explain to you personally how you can work with our products. We are also present at various exhibitions and festivals. For the latest information and updates on upcoming events, sign up to our newsletter. More questions? Don't hesitate to contact us directly.

We are an European distribution and offer international delivery. In the link below, you will find detailed information about our delivery times and shipping prices for surfboards and blanks and smaller products within different regions, including Europe, EU island territories, and non-European destinations.

Shipping Informations

The following link will take you to our workshop page, where you will find lots of information about the workshop process, price and dates. At the bottom of the page you will find specific FAQ's about the shaping workshop.
If you would like a personal consultation, please give us a call or send us an e-mail.

Workshop Page

The following link will take you to our About agave page where you will find lots of information about production, sustainability, the shaping process and the performance of agave. At the bottom of the page you will also find specific FAQ's about agave blanks. If you would like a personal consultation, please give us a call or send us an e-mail.

About Agave

The following link will take you to our surfboard store. Here you have the choice of famous board models of well-known shapers from Europe.

Surfboard Store 

If you want to order your own vision of your surfboard, you can send us your custom request and we will create your dream board from agave. If you would like a personal consultation, please give us a call or send us an email.

Custom Surfboard

Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr Informationen ...